Save Status:
or to save your progress. The page will not refresh.
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crossword Word Search Worksheet
Rate This Puzzle:
Log in or sign up to rate this puzzle.

Wood Working II

Across
a power tool using a vertical, reciprocating blade; used for cutting different kinds of materials depending on the type of blade used
a handsaw used with a miter box; a power saw, similar to a circular saw, that cuts miters
a small wafer of wood that is inserted and glued to an edge groove between two pieces of wood to be joined
A beveled or grooved edge that is 45°.
the shaft of a bit or cutter that is gripped in a tool by a chuck or a collet
a comprehensive list of all the needed parts for a project, including the name of each piece needed, and the dimensions of each piece
refers to work done on a lathe
the part of a table between the legs that attaches the base to the top
To sharpen
used for paring and light chopping; edges are beveled to allow access to inside corners of joints
a power tool that consists of a motor and blade that are suspended above the table from an arm that pivots at the rear and upon which the motor slides
a cylindrical length of wood used for making joints by inserting a length into two corresponding holes and gluing with clamp pressure
A waste piece of lumber
A small hole drilled in your work that is intended to guide a fastener.
A cut parallel to the grain of a board.
the wood of any coniferous tree
a chisel-like turning or carving tool with a curved edge
Down
a narrow strip of wood that is glued in corresponding grooves to join pieces of wood
This joint offers great strength and rigidity for box work, especially drawers and case pieces.
mature wood that forms the spine of a tree
a combination or iron, carbon and alloy metal (usually tungsten) used to make hard, brittle but long-lasting material used for cutting edges of bits and blades
a hand saw that is stabilized with a rigid spine along the back of the blade
A metal ring secured around a smaller piece of metal or wood to reinforce it.
a thick wedge of wood used to fill a gap or make a surface level
To cut a cone-shaped recess in a pilot or clearance hole that allows a flat-head screw to seat flush or below the surface; also, the hole itself.
A three-sided trench cut with the grain of a board.
The wood removed by a saw blade between the piece you keep and your offcut.
To drill a hole before driving a nail.
the wood from any number of flowering, fruit- or nut-bearing trees
Primarily used in commercial applications, the interlocking joints reinforce and align panel joints.
a wood-boring device or bit
Power tool used to carve thin slices from a board to straighten or square a surface or edge
machine used for turning wood on an axis
the act of making true, as in square, flat, concentric or balanced
the portion of a screw length below the head that has threads on it